10 changed files with 1289 additions and 0 deletions
--- a/.gitattributes
+++ b/.gitattributes
@ -0,0 +1,63 @@
+###############################################################################
+# Set default behavior to automatically normalize line endings.
+###############################################################################
+* text=auto
+
+###############################################################################
+# Set default behavior for command prompt diff.
+#
+# This is need for earlier builds of msysgit that does not have it on by
+# default for csharp files.
+# Note: This is only used by command line
+###############################################################################
+#*.cs     diff=csharp
+
+###############################################################################
+# Set the merge driver for project and solution files
+#
+# Merging from the command prompt will add diff markers to the files if there
+# are conflicts (Merging from VS is not affected by the settings below, in VS
+# the diff markers are never inserted). Diff markers may cause the following 
+# file extensions to fail to load in VS. An alternative would be to treat
+# these files as binary and thus will always conflict and require user
+# intervention with every merge. To do so, just uncomment the entries below
+###############################################################################
+#*.sln       merge=binary
+#*.csproj    merge=binary
+#*.vbproj    merge=binary
+#*.vcxproj   merge=binary
+#*.vcproj    merge=binary
+#*.dbproj    merge=binary
+#*.fsproj    merge=binary
+#*.lsproj    merge=binary
+#*.wixproj   merge=binary
+#*.modelproj merge=binary
+#*.sqlproj   merge=binary
+#*.wwaproj   merge=binary
+
+###############################################################################
+# behavior for image files
+#
+# image files are treated as binary by default.
+###############################################################################
+#*.jpg   binary
+#*.png   binary
+#*.gif   binary
+
+###############################################################################
+# diff behavior for common document formats
+# 
+# Convert binary document formats to text before diffing them. This feature
+# is only available from the command line. Turn it on by uncommenting the 
+# entries below.
+###############################################################################
+#*.doc   diff=astextplain
+#*.DOC   diff=astextplain
+#*.docx  diff=astextplain
+#*.DOCX  diff=astextplain
+#*.dot   diff=astextplain
+#*.DOT   diff=astextplain
+#*.pdf   diff=astextplain
+#*.PDF   diff=astextplain
+#*.rtf   diff=astextplain
+#*.RTF   diff=astextplain
--- a/.gitignore
+++ b/.gitignore
@ -0,0 +1,363 @@
+## Ignore Visual Studio temporary files, build results, and
+## files generated by popular Visual Studio add-ons.
+##
+## Get latest from https://github.com/github/gitignore/blob/master/VisualStudio.gitignore
+
+# User-specific files
+*.rsuser
+*.suo
+*.user
+*.userosscache
+*.sln.docstates
+
+# User-specific files (MonoDevelop/Xamarin Studio)
+*.userprefs
+
+# Mono auto generated files
+mono_crash.*
+
+# Build results
+[Dd]ebug/
+[Dd]ebugPublic/
+[Rr]elease/
+[Rr]eleases/
+x64/
+x86/
+[Ww][Ii][Nn]32/
+[Aa][Rr][Mm]/
+[Aa][Rr][Mm]64/
+bld/
+[Bb]in/
+[Oo]bj/
+[Oo]ut/
+[Ll]og/
+[Ll]ogs/
+
+# Visual Studio 2015/2017 cache/options directory
+.vs/
+# Uncomment if you have tasks that create the project's static files in wwwroot
+#wwwroot/
+
+# Visual Studio 2017 auto generated files
+Generated\ Files/
+
+# MSTest test Results
+[Tt]est[Rr]esult*/
+[Bb]uild[Ll]og.*
+
+# NUnit
+*.VisualState.xml
+TestResult.xml
+nunit-*.xml
+
+# Build Results of an ATL Project
+[Dd]ebugPS/
+[Rr]eleasePS/
+dlldata.c
+
+# Benchmark Results
+BenchmarkDotNet.Artifacts/
+
+# .NET Core
+project.lock.json
+project.fragment.lock.json
+artifacts/
+
+# ASP.NET Scaffolding
+ScaffoldingReadMe.txt
+
+# StyleCop
+StyleCopReport.xml
+
+# Files built by Visual Studio
+*_i.c
+*_p.c
+*_h.h
+*.ilk
+*.meta
+*.obj
+*.iobj
+*.pch
+*.pdb
+*.ipdb
+*.pgc
+*.pgd
+*.rsp
+*.sbr
+*.tlb
+*.tli
+*.tlh
+*.tmp
+*.tmp_proj
+*_wpftmp.csproj
+*.log
+*.vspscc
+*.vssscc
+.builds
+*.pidb
+*.svclog
+*.scc
+
+# Chutzpah Test files
+_Chutzpah*
+
+# Visual C++ cache files
+ipch/
+*.aps
+*.ncb
+*.opendb
+*.opensdf
+*.sdf
+*.cachefile
+*.VC.db
+*.VC.VC.opendb
+
+# Visual Studio profiler
+*.psess
+*.vsp
+*.vspx
+*.sap
+
+# Visual Studio Trace Files
+*.e2e
+
+# TFS 2012 Local Workspace
+$tf/
+
+# Guidance Automation Toolkit
+*.gpState
+
+# ReSharper is a .NET coding add-in
+_ReSharper*/
+*.[Rr]e[Ss]harper
+*.DotSettings.user
+
+# TeamCity is a build add-in
+_TeamCity*
+
+# DotCover is a Code Coverage Tool
+*.dotCover
+
+# AxoCover is a Code Coverage Tool
+.axoCover/*
+!.axoCover/settings.json
+
+# Coverlet is a free, cross platform Code Coverage Tool
+coverage*.json
+coverage*.xml
+coverage*.info
+
+# Visual Studio code coverage results
+*.coverage
+*.coveragexml
+
+# NCrunch
+_NCrunch_*
+.*crunch*.local.xml
+nCrunchTemp_*
+
+# MightyMoose
+*.mm.*
+AutoTest.Net/
+
+# Web workbench (sass)
+.sass-cache/
+
+# Installshield output folder
+[Ee]xpress/
+
+# DocProject is a documentation generator add-in
+DocProject/buildhelp/
+DocProject/Help/*.HxT
+DocProject/Help/*.HxC
+DocProject/Help/*.hhc
+DocProject/Help/*.hhk
+DocProject/Help/*.hhp
+DocProject/Help/Html2
+DocProject/Help/html
+
+# Click-Once directory
+publish/
+
+# Publish Web Output
+*.[Pp]ublish.xml
+*.azurePubxml
+# Note: Comment the next line if you want to checkin your web deploy settings,
+# but database connection strings (with potential passwords) will be unencrypted
+*.pubxml
+*.publishproj
+
+# Microsoft Azure Web App publish settings. Comment the next line if you want to
+# checkin your Azure Web App publish settings, but sensitive information contained
+# in these scripts will be unencrypted
+PublishScripts/
+
+# NuGet Packages
+*.nupkg
+# NuGet Symbol Packages
+*.snupkg
+# The packages folder can be ignored because of Package Restore
+**/[Pp]ackages/*
+# except build/, which is used as an MSBuild target.
+!**/[Pp]ackages/build/
+# Uncomment if necessary however generally it will be regenerated when needed
+#!**/[Pp]ackages/repositories.config
+# NuGet v3's project.json files produces more ignorable files
+*.nuget.props
+*.nuget.targets
+
+# Microsoft Azure Build Output
+csx/
+*.build.csdef
+
+# Microsoft Azure Emulator
+ecf/
+rcf/
+
+# Windows Store app package directories and files
+AppPackages/
+BundleArtifacts/
+Package.StoreAssociation.xml
+_pkginfo.txt
+*.appx
+*.appxbundle
+*.appxupload
+
+# Visual Studio cache files
+# files ending in .cache can be ignored
+*.[Cc]ache
+# but keep track of directories ending in .cache
+!?*.[Cc]ache/
+
+# Others
+ClientBin/
+~$*
+*~
+*.dbmdl
+*.dbproj.schemaview
+*.jfm
+*.pfx
+*.publishsettings
+orleans.codegen.cs
+
+# Including strong name files can present a security risk
+# (https://github.com/github/gitignore/pull/2483#issue-259490424)
+#*.snk
+
+# Since there are multiple workflows, uncomment next line to ignore bower_components
+# (https://github.com/github/gitignore/pull/1529#issuecomment-104372622)
+#bower_components/
+
+# RIA/Silverlight projects
+Generated_Code/
+
+# Backup & report files from converting an old project file
+# to a newer Visual Studio version. Backup files are not needed,
+# because we have git ;-)
+_UpgradeReport_Files/
+Backup*/
+UpgradeLog*.XML
+UpgradeLog*.htm
+ServiceFabricBackup/
+*.rptproj.bak
+
+# SQL Server files
+*.mdf
+*.ldf
+*.ndf
+
+# Business Intelligence projects
+*.rdl.data
+*.bim.layout
+*.bim_*.settings
+*.rptproj.rsuser
+*- [Bb]ackup.rdl
+*- [Bb]ackup ([0-9]).rdl
+*- [Bb]ackup ([0-9][0-9]).rdl
+
+# Microsoft Fakes
+FakesAssemblies/
+
+# GhostDoc plugin setting file
+*.GhostDoc.xml
+
+# Node.js Tools for Visual Studio
+.ntvs_analysis.dat
+node_modules/
+
+# Visual Studio 6 build log
+*.plg
+
+# Visual Studio 6 workspace options file
+*.opt
+
+# Visual Studio 6 auto-generated workspace file (contains which files were open etc.)
+*.vbw
+
+# Visual Studio LightSwitch build output
+**/*.HTMLClient/GeneratedArtifacts
+**/*.DesktopClient/GeneratedArtifacts
+**/*.DesktopClient/ModelManifest.xml
+**/*.Server/GeneratedArtifacts
+**/*.Server/ModelManifest.xml
+_Pvt_Extensions
+
+# Paket dependency manager
+.paket/paket.exe
+paket-files/
+
+# FAKE - F# Make
+.fake/
+
+# CodeRush personal settings
+.cr/personal
+
+# Python Tools for Visual Studio (PTVS)
+__pycache__/
+*.pyc
+
+# Cake - Uncomment if you are using it
+# tools/**
+# !tools/packages.config
+
+# Tabs Studio
+*.tss
+
+# Telerik's JustMock configuration file
+*.jmconfig
+
+# BizTalk build output
+*.btp.cs
+*.btm.cs
+*.odx.cs
+*.xsd.cs
+
+# OpenCover UI analysis results
+OpenCover/
+
+# Azure Stream Analytics local run output
+ASALocalRun/
+
+# MSBuild Binary and Structured Log
+*.binlog
+
+# NVidia Nsight GPU debugger configuration file
+*.nvuser
+
+# MFractors (Xamarin productivity tool) working folder
+.mfractor/
+
+# Local History for Visual Studio
+.localhistory/
+
+# BeatPulse healthcheck temp database
+healthchecksdb
+
+# Backup folder for Package Reference Convert tool in Visual Studio 2017
+MigrationBackup/
+
+# Ionide (cross platform F# VS Code tools) working folder
+.ionide/
+
+# Fody - auto-generated XML schema
+FodyWeavers.xsd
--- a/TenderItem.Induct/FillComboFieldPlugIn.cs
+++ b/TenderItem.Induct/FillComboFieldPlugIn.cs
@ -0,0 +1,68 @@
+using Kingdee.BOS.App.Data;
+using Kingdee.BOS.Core;
+using Kingdee.BOS.Core.Bill.PlugIn;
+using Kingdee.BOS.Core.DynamicForm.PlugIn.Args;
+using Kingdee.BOS.Core.List.PlugIn.Args;
+using Kingdee.BOS.Core.Util;
+using Kingdee.BOS.Util;
+using System;
+using System.Collections.Generic;
+using System.ComponentModel;
+using System.Linq;
+using System.Text;
+using System.Threading.Tasks;
+
+namespace TenderItem.Induct
+{
+    /// <summary>
+    /// 【单据插件】填充中标项目分类
+    /// </summary>
+    [Description("【单据插件】填充中标项目分类"), HotUpdate]
+    public class FillComboFieldPlugIn: AbstractBillPlugIn
+    {
+        public override void DataChanged(DataChangedEventArgs e)
+        {
+            base.DataChanged(e);
+            //this.View.ShowMessage("触发");
+            if (e.Field.Key == "F_CYG_BidSerial")
+            {
+                string newValue = Convert.ToString(e.NewValue);
+
+                string sql1 = string.Format(@"/*dialect*/
+                Select
+                FBIDPROJECTTYPE
+                From
+                MBBA_t_Cust100005
+                Where FTENDER = '{0}'", newValue);
+
+                var NameList = DBUtils.ExecuteDynamicObject(Context, sql1);
+                string Name = "";
+                if (NameList.Count != 0)
+                {
+                    Name = NameList[0]["FBIDPROJECTTYPE"].ToString();
+                }
+
+                string sql2 = string.Format(@"/*dialect*/
+                SELECT 
+                A.FMASTERID
+                FROM 
+                T_BAS_ASSISTANTDATAENTRY A
+                JOIN
+                T_BAS_ASSISTANTDATAENTRY_L B
+                on A.FENTRYID = B.FENTRYID
+                Where B.FLOCALEID = 2052
+                AND A.FID = '6716fb25f5fc9d'
+                AND B.FDataValue = '{0}'", Name);
+
+                var NumberList = DBUtils.ExecuteDynamicObject(Context, sql2);
+                var Number = "";
+                if (NumberList.Count != 0) 
+                {
+                    Number = NumberList[0]["FMASTERID"].ToString();
+                }
+
+                this.View.Model.SetValue("F_CYG_WinningProject", Number);
+            }
+        }
+    }
+}
--- a/TenderItem.Induct/FormOperationServicePlugIn.cs
+++ b/TenderItem.Induct/FormOperationServicePlugIn.cs
@ -0,0 +1,100 @@
+using Kingdee.BOS.App.Data;
+using Kingdee.BOS.Core.BusinessFlow;
+using Kingdee.BOS.Core.DynamicForm.PlugIn;
+using Kingdee.BOS.Core.DynamicForm.PlugIn.Args;
+using Kingdee.BOS.Core.List.PlugIn;
+using Kingdee.BOS.Util;
+using System;
+using System.Collections.Generic;
+using System.ComponentModel;
+using System.Linq;
+using System.Text;
+using System.Threading.Tasks;
+using System.Xml.Linq;
+
+namespace TenderItem.Induct
+{
+    /// <summary>
+    /// 【表单插件】导入前事件
+    /// 查询Excel中的标书编号
+    /// 删除数据库中存在对应标书编号的数据
+    /// 实现重复标书覆盖效果
+    /// </summary>
+    [Description("【表单插件】导入前事件"), HotUpdate]
+    public class FormOperationServicePlugIn : AbstractListPlugIn
+    {
+        /// <summary>
+        /// 导入之前方法
+        /// </summary>
+        /// <param name="e"></param>
+        public override void BeforeImportData(BeforeImportDataArgs e)
+        {
+            base.BeforeImportData(e);
+
+            string FTenderList = "";
+
+            var dataTable = e.DataSource.Tables[0];
+
+            //循环找到所有标书编号
+            for (int i = 0; i < dataTable.Rows.Count; i++)
+            {
+                var FTender = dataTable.Rows[i]["FTender"];
+                var FBidProjectType = dataTable.Rows[i]["FBidProjectType"];
+
+                string sql2 = string.Format(@"/*dialect*/
+                SELECT 
+                A.FMASTERID
+                FROM 
+                T_BAS_ASSISTANTDATAENTRY A
+                JOIN
+                T_BAS_ASSISTANTDATAENTRY_L B
+                on A.FENTRYID = B.FENTRYID
+                Where B.FLOCALEID = 2052
+                AND A.FID = '6716fb25f5fc9d'
+                AND B.FDataValue = '{0}'", FBidProjectType);
+
+                var FBidProjectTypeList = DBUtils.ExecuteDynamicObject(Context, sql2);
+
+                var FBidProjectTypeId = "";
+                if (FBidProjectTypeList.Count != 0)
+                {
+                    FBidProjectTypeId = FBidProjectTypeList[0]["FMASTERID"].ToString();
+                }
+
+                string sql = string.Format(@"Update 
+                T_CRM_CONTRACT 
+                Set F_CYG_WinningProject = '{1}' 
+                Where F_CYG_BidSerial = '{0}'", FTender, FBidProjectTypeId);
+
+                DBUtils.ExecuteDynamicObject(Context, sql);
+
+                decimal n1 = 0;
+
+                decimal n2 = 0;
+
+                string nn1 = dataTable.Rows[i]["FWinningBid"].ToString();
+                
+                string nn2 = dataTable.Rows[i]["FFrameVolume"].ToString();
+
+                if(!string.IsNullOrEmpty(nn1))
+                {
+                    n1 = Convert.ToDecimal(nn1);
+                }
+                if(!string.IsNullOrEmpty(nn2))
+                {
+                    n2 = Convert.ToDecimal(nn2);
+                }
+
+                dataTable.Rows[i]["FWinningBidSubtotal"] = n1 + n2;
+
+                FTenderList += "'" + FTender + "',";
+            }
+
+            FTenderList += "'0'";
+
+            string sqlDelete = string.Format(@"Delete MBBA_t_Cust100005 where FTender in ({0})", FTenderList);
+            DBUtils.ExecuteDynamicObject(this.Context, sqlDelete);
+            //this.View.ShowErrMessage("引入数据操作（测试是否进入插件！！！）");
+        }
+    }
+}
--- a/TenderItem.Induct/Properties/AssemblyInfo.cs
+++ b/TenderItem.Induct/Properties/AssemblyInfo.cs
@ -0,0 +1,33 @@
+using System.Reflection;
+using System.Runtime.CompilerServices;
+using System.Runtime.InteropServices;
+
+// 有关程序集的一般信息由以下
+// 控制。更改这些特性值可修改
+// 与程序集关联的信息。
+[assembly: AssemblyTitle("TenderItem.Induct")]
+[assembly: AssemblyDescription("")]
+[assembly: AssemblyConfiguration("")]
+[assembly: AssemblyCompany("")]
+[assembly: AssemblyProduct("TenderItem.Induct")]
+[assembly: AssemblyCopyright("Copyright ©  2024")]
+[assembly: AssemblyTrademark("")]
+[assembly: AssemblyCulture("")]
+
+// 将 ComVisible 设置为 false 会使此程序集中的类型
+//对 COM 组件不可见。如果需要从 COM 访问此程序集中的类型
+//请将此类型的 ComVisible 特性设置为 true。
+[assembly: ComVisible(false)]
+
+// 如果此项目向 COM 公开，则下列 GUID 用于类型库的 ID
+[assembly: Guid("b19f9275-cf4f-45ad-a0b1-a138317ddf6b")]
+
+// 程序集的版本信息由下列四个值组成: 
+//
+//      主版本
+//      次版本
+//      生成号
+//      修订号
+//
+[assembly: AssemblyVersion("1.0.0.0")]
+[assembly: AssemblyFileVersion("1.0.0.0")]
--- a/TenderItem.Induct/TenderFormServicePlugIn.cs
+++ b/TenderItem.Induct/TenderFormServicePlugIn.cs
@ -0,0 +1,36 @@
+using Kingdee.BOS.Core.Report.PlugIn;
+using Kingdee.BOS.Core.Report.PlugIn.Args;
+using Kingdee.BOS.Util;
+using System;
+using System.Collections.Generic;
+using System.ComponentModel;
+using System.Linq;
+using System.Text;
+using System.Threading.Tasks;
+
+namespace TenderItem.Induct
+{
+    [Description("【报表表单插件】投标项目报表"), HotUpdate]
+    public class TenderFormServicePlugIn: AbstractSysReportPlugIn
+    {
+        public override void FormatCellValue(FormatCellValueArgs args)
+        {
+            // 格式化日期
+            base.FormatCellValue(args);
+            if (args.Header.ColType == Kingdee.BOS.SqlStorageType.SqlDatetime)
+            {
+                DateTime value = Convert.ToDateTime(args.FormateValue);
+                string afterValue = value.ToString("yyyy-MM-dd");
+                args.FormateValue = afterValue;
+            }
+            // 格式化金额  汇率不格式化
+            if (args.Header.ColType == Kingdee.BOS.SqlStorageType.SqlDecimal)
+            {
+                decimal value = decimal.Parse(args.FormateValue);
+                // 千分位
+                string afterValue = value.ToString("N");
+                args.FormateValue = afterValue;
+            }
+        }
+    }
+}
--- a/TenderItem.Induct/TenderItem.Induct.csproj
+++ b/TenderItem.Induct/TenderItem.Induct.csproj
@ -0,0 +1,82 @@
+<?xml version="1.0" encoding="utf-8"?>
+<Project ToolsVersion="15.0" xmlns="http://schemas.microsoft.com/developer/msbuild/2003">
+  <Import Project="$(MSBuildExtensionsPath)\$(MSBuildToolsVersion)\Microsoft.Common.props" Condition="Exists('$(MSBuildExtensionsPath)\$(MSBuildToolsVersion)\Microsoft.Common.props')" />
+  <PropertyGroup>
+    <Configuration Condition=" '$(Configuration)' == '' ">Debug</Configuration>
+    <Platform Condition=" '$(Platform)' == '' ">AnyCPU</Platform>
+    <ProjectGuid>{B19F9275-CF4F-45AD-A0B1-A138317DDF6B}</ProjectGuid>
+    <OutputType>Library</OutputType>
+    <AppDesignerFolder>Properties</AppDesignerFolder>
+    <RootNamespace>TenderItem.Induct</RootNamespace>
+    <AssemblyName>TenderItem.Induct</AssemblyName>
+    <TargetFrameworkVersion>v4.8</TargetFrameworkVersion>
+    <FileAlignment>512</FileAlignment>
+    <Deterministic>true</Deterministic>
+  </PropertyGroup>
+  <PropertyGroup Condition=" '$(Configuration)|$(Platform)' == 'Debug|AnyCPU' ">
+    <DebugSymbols>true</DebugSymbols>
+    <DebugType>full</DebugType>
+    <Optimize>false</Optimize>
+    <OutputPath>bin\Debug\</OutputPath>
+    <DefineConstants>DEBUG;TRACE</DefineConstants>
+    <ErrorReport>prompt</ErrorReport>
+    <WarningLevel>4</WarningLevel>
+  </PropertyGroup>
+  <PropertyGroup Condition=" '$(Configuration)|$(Platform)' == 'Release|AnyCPU' ">
+    <DebugType>pdbonly</DebugType>
+    <Optimize>true</Optimize>
+    <OutputPath>bin\Release\</OutputPath>
+    <DefineConstants>TRACE</DefineConstants>
+    <ErrorReport>prompt</ErrorReport>
+    <WarningLevel>4</WarningLevel>
+  </PropertyGroup>
+  <ItemGroup>
+    <Reference Include="Kingdee.BOS">
+      <HintPath>..\..\AccountingVoucher\AccountingVoucher.BOS\bin\Debug\Kingdee.BOS.dll</HintPath>
+    </Reference>
+    <Reference Include="Kingdee.BOS.App">
+      <HintPath>..\..\AccountingVoucher\AccountingVoucher.BOS\bin\Debug\Kingdee.BOS.App.dll</HintPath>
+    </Reference>
+    <Reference Include="Kingdee.BOS.Contracts">
+      <HintPath>..\..\AccountingVoucher\AccountingVoucher.BOS\bin\Debug\Kingdee.BOS.Contracts.dll</HintPath>
+    </Reference>
+    <Reference Include="Kingdee.BOS.Core">
+      <HintPath>..\..\AccountingVoucher\AccountingVoucher.BOS\bin\Debug\Kingdee.BOS.Core.dll</HintPath>
+    </Reference>
+    <Reference Include="Kingdee.BOS.DataEntity">
+      <HintPath>..\..\AccountingVoucher\AccountingVoucher.BOS\bin\Debug\Kingdee.BOS.DataEntity.dll</HintPath>
+    </Reference>
+    <Reference Include="Kingdee.BOS.Web">
+      <HintPath>..\..\AccountingVoucher\AccountingVoucher.BOS\bin\Debug\Kingdee.BOS.Web.dll</HintPath>
+    </Reference>
+    <Reference Include="Kingdee.BOS.Web.HTML">
+      <HintPath>..\..\AccountingVoucher\AccountingVoucher.BOS\bin\Debug\Kingdee.BOS.Web.HTML.dll</HintPath>
+    </Reference>
+    <Reference Include="Kingdee.BOS.Web.HTML.Core">
+      <HintPath>..\..\AccountingVoucher\AccountingVoucher.BOS\bin\Debug\Kingdee.BOS.Web.HTML.Core.dll</HintPath>
+    </Reference>
+    <Reference Include="Kingdee.K3.MFG.PLN.Business.PlugIn">
+      <HintPath>..\..\AccountingVoucher\AccountingVoucher.BOS\bin\Debug\Kingdee.K3.MFG.PLN.Business.PlugIn.dll</HintPath>
+    </Reference>
+    <Reference Include="System" />
+    <Reference Include="System.Core" />
+    <Reference Include="System.Xml.Linq" />
+    <Reference Include="System.Data.DataSetExtensions" />
+    <Reference Include="Microsoft.CSharp" />
+    <Reference Include="System.Data" />
+    <Reference Include="System.Net.Http" />
+    <Reference Include="System.Xml" />
+  </ItemGroup>
+  <ItemGroup>
+    <Compile Include="FillComboFieldPlugIn.cs" />
+    <Compile Include="TenderFormServicePlugIn.cs" />
+    <Compile Include="TenderProjectReportPlugin2.cs" />
+    <Compile Include="TenderProjectReportPlugin.cs" />
+    <Compile Include="FormOperationServicePlugIn.cs" />
+    <Compile Include="Properties\AssemblyInfo.cs" />
+  </ItemGroup>
+  <Import Project="$(MSBuildToolsPath)\Microsoft.CSharp.targets" />
+  <PropertyGroup>
+    <PostBuildEvent>copy  $(TargetPath) "F:\金蝶\WebSite\Bin\$(TargetFileName)"</PostBuildEvent>
+  </PropertyGroup>
+</Project>
--- a/TenderItem.Induct/TenderProjectReportPlugin.cs
+++ b/TenderItem.Induct/TenderProjectReportPlugin.cs
@ -0,0 +1,316 @@
+using Kingdee.BOS.App.Data;
+using Kingdee.BOS.Contracts.Report;
+using Kingdee.BOS.Core.Report;
+using Kingdee.BOS.Orm.Cvp;
+using Kingdee.BOS.Orm.DataEntity;
+using Kingdee.BOS.Util;
+using Kingdee.BOS;
+using System;
+using System.Collections.Generic;
+using System.ComponentModel;
+using System.Data;
+using System.Linq;
+using System.Text;
+using System.Threading.Tasks;
+
+namespace TenderItem.Induct
+{
+    /// <summary>
+    /// 【列表插件】投标项目数据简单报表
+    /// </summary>
+    [Description("【列表插件】投标项目数据报表"), HotUpdate]
+    public class TenderProjectReportPlugin : SysReportBaseService
+    {
+        /// <summary>
+        /// 初始化 
+        /// </summary>
+        public override void Initialize()
+        {
+            base.Initialize();
+            this.ReportProperty.ReportName = new LocaleValue("投标项目数据报表", base.Context.UserLocale.LCID);
+            this.ReportProperty.IsUIDesignerColumns = false;
+            // 简单账表类型：普通、树形、分页
+            this.ReportProperty.ReportType = ReportType.REPORTTYPE_NORMAL;
+            this.IsCreateTempTableByPlugin = true;
+            // 
+            this.IsCreateTempTableByPlugin = true;
+            // 
+            this.ReportProperty.IsGroupSummary = true;
+            // 
+            this.ReportProperty.SimpleAllCols = false;
+            // 单据主键：两行FID相同，则为同一单的两条分录，单据编号可以不重复显示
+            this.ReportProperty.PrimaryKeyFieldName = "FID";
+            // 
+            this.ReportProperty.IsDefaultOnlyDspSumAndDetailData = true;
+
+            // 设置精度控制
+            var list = new List<DecimalControlField>
+            {
+                new DecimalControlField("FDECIMALS", "OrigInvoiceAmount"),
+                new DecimalControlField("FDECIMALS", "ExchangeRate"),
+                new DecimalControlField("FDECIMALS", "InvoiceAmountTHB"),
+                new DecimalControlField("FDECIMALS", "MonthEndExRate"),
+                new DecimalControlField("FDECIMALS", "RevaluationAountInTHB"),
+                new DecimalControlField("FDECIMALS", "UnrealizedGainLoss"),
+            };
+            this.ReportProperty.DecimalControlFieldList = list;
+        }
+
+        public override ReportHeader GetReportHeaders(IRptParams filter)
+        {
+            base.GetReportHeaders(filter);
+            ReportHeader header = new ReportHeader();
+            if (this.Context.UserLocale.LCID == 2052)
+            {
+                header.AddChild("Year", new LocaleValue("年份"), SqlStorageType.Sqlvarchar);
+                header.AddChild("TenderNumber", new LocaleValue("招标编号"), SqlStorageType.Sqlvarchar);
+                header.AddChild("TenderMain", new LocaleValue("标书主编号"), SqlStorageType.Sqlvarchar);
+                header.AddChild("Tender", new LocaleValue("标书编号"), SqlStorageType.Sqlvarchar);
+                header.AddChild("ProjectName", new LocaleValue("项目名称"), SqlStorageType.Sqlvarchar);
+                header.AddChild("TenderingUnit", new LocaleValue("招标单位"), SqlStorageType.Sqlvarchar);
+                header.AddChild("BidProjectType", new LocaleValue("中标项目分类"), SqlStorageType.Sqlvarchar);
+                header.AddChild("ProvincesHead", new LocaleValue("省区负责人"), SqlStorageType.Sqlvarchar);
+                header.AddChild("Authorizer", new LocaleValue("授权人"), SqlStorageType.Sqlvarchar);
+                header.AddChild("Region", new LocaleValue("大区"), SqlStorageType.Sqlvarchar);
+                header.AddChild("Provinces", new LocaleValue("省区"), SqlStorageType.Sqlvarchar);
+                header.AddChild("BidProductsType", new LocaleValue("中标产品分类"), SqlStorageType.Sqlvarchar);
+                header.AddChild("BidProducts", new LocaleValue("中标产品"), SqlStorageType.Sqlvarchar);
+                header.AddChild("BidPackageNumber", new LocaleValue("中标包号"), SqlStorageType.Sqlvarchar);
+                header.AddChild("WinningBid", new LocaleValue("中标额（万元）"), SqlStorageType.SqlDecimal);
+                header.AddChild("FrameVolume", new LocaleValue("框架标预估体量"), SqlStorageType.SqlDecimal);
+                header.AddChild("WinningBidSubtotal", new LocaleValue("中标额小计"), SqlStorageType.SqlDecimal);
+                header.AddChild("BidsDate", new LocaleValue("开标时间"), SqlStorageType.SqlDatetime);
+                header.AddChild("InstallationIllustrate", new LocaleValue("安装说明"), SqlStorageType.Sqlvarchar);
+                header.AddChild("Remark", new LocaleValue("备注"), SqlStorageType.Sqlvarchar);
+                header.AddChild("ContractOriginalReturns", new LocaleValue("合同原件返回额"), SqlStorageType.SqlDecimal);
+                header.AddChild("AmountOrder", new LocaleValue("下单金额"), SqlStorageType.SqlDecimal);
+                header.AddChild("AmountOriginalOrder", new LocaleValue("下单无原件金额"), SqlStorageType.SqlDecimal);
+                header.AddChild("ContractAmountOrder", new LocaleValue("合同返回未下单金额"), SqlStorageType.SqlDecimal);
+                header.AddChild("BidderNotAgency", new LocaleValue("中标未签约且未下单（万元）"), SqlStorageType.SqlDecimal);
+                header.AddChild("Sales", new LocaleValue("销售额"), SqlStorageType.SqlDecimal);
+                header.AddChild("InvoicedAmount", new LocaleValue("已开票额"), SqlStorageType.SqlDecimal);
+                header.AddChild("UnbilledAmount", new LocaleValue("未开票额"), SqlStorageType.SqlDecimal);
+                header.AddChild("ProjectSpecialIllustrate", new LocaleValue("项目特殊情况说明"), SqlStorageType.Sqlvarchar);
+                header.AddChild("Cost", new LocaleValue("成本"), SqlStorageType.SqlDecimal);
+            }
+            else
+            {
+                header.AddChild("Year", new LocaleValue("Year"), SqlStorageType.Sqlvarchar);
+                header.AddChild("TenderNumber", new LocaleValue("TenderNumber"), SqlStorageType.Sqlvarchar);
+                header.AddChild("TenderMain", new LocaleValue("TenderMain"), SqlStorageType.Sqlvarchar);
+                header.AddChild("Tender", new LocaleValue("Tender"), SqlStorageType.Sqlvarchar);
+                header.AddChild("ProjectName", new LocaleValue("ProjectName"), SqlStorageType.Sqlvarchar);
+                header.AddChild("TenderingUnit", new LocaleValue("TenderingUnit"), SqlStorageType.Sqlvarchar);
+                header.AddChild("BidProjectType", new LocaleValue("BidProjectType"), SqlStorageType.Sqlvarchar);
+                header.AddChild("ProvincesHead", new LocaleValue("ProvincesHead"), SqlStorageType.Sqlvarchar);
+                header.AddChild("Authorizer", new LocaleValue("Authorizer"), SqlStorageType.Sqlvarchar);
+                header.AddChild("Region", new LocaleValue("Region"), SqlStorageType.Sqlvarchar);
+                header.AddChild("Provinces", new LocaleValue("Provinces"), SqlStorageType.Sqlvarchar);
+                header.AddChild("BidProductsType", new LocaleValue("BidProductsType"), SqlStorageType.Sqlvarchar);
+                header.AddChild("BidProducts", new LocaleValue("BidProducts"), SqlStorageType.Sqlvarchar);
+                header.AddChild("BidPackageNumber", new LocaleValue("BidPackageNumber"), SqlStorageType.Sqlvarchar);
+                header.AddChild("WinningBid", new LocaleValue("WinningBid"), SqlStorageType.SqlDecimal);
+                header.AddChild("FrameVolume", new LocaleValue("FrameVolume"), SqlStorageType.SqlDecimal);
+                header.AddChild("WinningBidSubtotal", new LocaleValue("WinningBidSubtotal"), SqlStorageType.SqlDecimal);
+                header.AddChild("BidsDate", new LocaleValue("InstallationIllustrate"), SqlStorageType.SqlDatetime);
+                header.AddChild("InstallationIllustrate", new LocaleValue("InstallationIllustrate"), SqlStorageType.Sqlvarchar);
+                header.AddChild("Remark", new LocaleValue("Remark"), SqlStorageType.Sqlvarchar);
+                header.AddChild("ContractOriginalReturns", new LocaleValue("ContractOriginalReturns"), SqlStorageType.SqlDecimal);
+                header.AddChild("AmountOrder", new LocaleValue("AmountOrder"), SqlStorageType.SqlDecimal);
+                header.AddChild("AmountOriginalOrder", new LocaleValue("AmountOriginalOrder"), SqlStorageType.SqlDecimal);
+                header.AddChild("ContractAmountOrder", new LocaleValue("ContractAmountOrder"), SqlStorageType.SqlDecimal);
+                header.AddChild("BidderNotAgency", new LocaleValue("BidderNotAgency"), SqlStorageType.SqlDecimal);
+                header.AddChild("Sales", new LocaleValue("Sales"), SqlStorageType.SqlDecimal);
+                header.AddChild("InvoicedAmount", new LocaleValue("InvoicedAmount"), SqlStorageType.SqlDecimal);
+                header.AddChild("UnbilledAmount", new LocaleValue("UnbilledAmount"), SqlStorageType.SqlDecimal);
+                header.AddChild("ProjectSpecialIllustrate", new LocaleValue("ProjectSpecialIllustrate"), SqlStorageType.Sqlvarchar);
+                header.AddChild("Cost", new LocaleValue("Cost"), SqlStorageType.SqlDecimal);
+            }
+            foreach (var item in header.GetChilds())
+            {
+                item.Width = 150;
+            }
+            return header;
+        }
+
+        public override void BuilderReportSqlAndTempTable(IRptParams filter, string tableName)
+        {
+            DynamicObject customFilter = filter.FilterParameter.CustomFilter;
+
+            // 年份
+            string fDate = customFilter["FDate"]?.ToString();
+            // 标书编号
+            string fTender = customFilter["FTender"]?.ToString();
+
+            base.BuilderReportSqlAndTempTable(filter, tableName);
+
+            string sql = string.Format(@"/*dialect*/
+            Select 
+            A.FYEAR as [Year],
+            A.FTenderNumber as TenderNumber,
+            A.FTenderMain as TenderMain,
+            A.FTender as Tender,
+            A.FProjectName as ProjectName,
+            A.FTenderingUnit as TenderingUnit,
+            A.FBidProjectType as BidProjectType,
+            A.FProvincesHead as ProvincesHead,
+            A.FAuthorizer as Authorizer,
+            A.FRegion as Region,
+            A.FProvinces as Provinces,
+            A.FBidProductsType as BidProductsType,
+            A.FBidProducts as BidProducts,
+            A.FBidPackageNumber as BidPackageNumber,
+            A.FWinningBid as WinningBid,
+            A.FFrameVolume as FrameVolume,
+            A.FWinningBidSubtotal as WinningBidSubtotal,
+            A.FBidsDate as BidsDate,
+            A.FInstallationIllustrate as InstallationIllustrate,
+            A.FRemark as Remark,
+            CASE WHEN ISNULL(E.F_CYG_Paperreturndate,'')='' THEN 0
+            ELSE (Select FCONTRACTAMOUNT_LC From T_CRM_CONTRACTFIN WHere FId = E.FID)
+            END as ContractOriginalReturns, --合同原件返回额				
+            ISNULL((Select
+            Sum(q.FAllAmount_LC)
+            From T_SAL_ORDERENTRY_F q
+            JOIN
+            T_SAL_ORDERENTRY w
+            on q.FID = w.FID
+            Where q.FID = B.FID
+            AND w.F_CYG_CheckBalance1 != 1),0) as AmountOrder, --下单金额 					
+            CASE WHEN ISNULL(E.F_CYG_Paperreturndate,'')='' THEN ISNULL((Select FCONTRACTAMOUNT_LC From T_CRM_CONTRACTFIN WHere FId = E.FID),0)
+            ELSE 0
+            END as AmountOriginalOrder, --下单无原件金额 				
+            ((CASE WHEN ISNULL(E.F_CYG_PAPERRETURNDATE,'')='' THEN 0
+            ELSE (Select FCONTRACTAMOUNT_LC From T_CRM_CONTRACTFIN WHere FId = E.FID)
+            END)-(ISNULL((Select
+            Sum(q.FAllAmount_LC)
+            From T_SAL_ORDERENTRY_F q
+            JOIN
+            T_SAL_ORDERENTRY w
+            on q.FID = w.FID
+            Where q.FID = B.FID
+            AND w.F_CYG_CheckBalance1 != 1),0))) as ContractAmountOrder, --合同返回未下单金额 			
+            ((A.FWinningBidSubtotal)-(CASE WHEN ISNULL(E.F_CYG_Paperreturndate,'')='' THEN 0
+            ELSE (Select FCONTRACTAMOUNT_LC From T_CRM_CONTRACTFIN WHere FId = E.FID)
+            END)-(CASE WHEN ISNULL(E.F_CYG_Paperreturndate,'')='' THEN ISNULL((Select FCONTRACTAMOUNT_LC From T_CRM_CONTRACTFIN WHere FId = E.FID),0)
+            ELSE 0
+            END)) as BidderNotAgency, --中标未签约且未下单（万元）
+            CASE WHEN D.FID in (Select Ae.FID From
+            (Select WW.FID,SUM(EE.FMustqty) as 'FMustqty',Sum(EE.FRealQty) as 'FRealQty' 
+            From
+	            (Select W.FSID,E.FID
+	            From T_AR_RECEIVABLEENTRY_LK W
+	            --Where FSTABLENAME = 'T_SAL_RETURNSTOCKENTRY'
+	            JOIN
+	            T_AR_RECEIVABLEENTRY E
+	            on W.FENTRYID = E.FENTRYID AND W.FSTABLENAME = 'T_SAL_RETURNSTOCKENTRY') WW
+            JOIN
+            T_SAL_RETURNSTOCKENTRY EE
+            on WW.FSID = EE.FENTRYID
+            Group by WW.FID) Ae
+            Where Ae.FMustqty=Ae.FRealQty)
+            THEN 0
+            ELSE
+            ISNULL((Select SUM(FALLAMOUNT) From T_AR_RECEIVABLEENTRY Where FID = D.FID),0) 
+            END as Sales,--销售额 						
+            ISNull((Select SUM(FOPENAMOUNTFOR) From T_AR_RECEIVABLEENTRY Where FID = D.FID),0) as InvoicedAmount, --已开票额
+            ((CASE WHEN D.FID in (Select Ae.FID From
+            (Select WW.FID,SUM(EE.FMustqty) as 'FMustqty',Sum(EE.FRealQty) as 'FRealQty' 
+            From
+	            (Select W.FSID,E.FID
+	            From T_AR_RECEIVABLEENTRY_LK W
+	            --Where FSTABLENAME = 'T_SAL_RETURNSTOCKENTRY'
+	            JOIN
+	            T_AR_RECEIVABLEENTRY E
+	            on W.FENTRYID = E.FENTRYID AND W.FSTABLENAME = 'T_SAL_RETURNSTOCKENTRY') WW
+            JOIN
+            T_SAL_RETURNSTOCKENTRY EE
+            on WW.FSID = EE.FENTRYID
+            Group by WW.FID) Ae
+            Where Ae.FMustqty=Ae.FRealQty)
+            THEN 0
+            ELSE
+            ISNULL((Select SUM(FALLAMOUNT) From T_AR_RECEIVABLEENTRY Where FID = D.FID),0) 
+            END)
+            -(ISNull((Select SUM(FOPENAMOUNTFOR) From T_AR_RECEIVABLEENTRY Where FID = D.FID),0))) as UnbilledAmount, --未开票额 	
+            A.FProjectSpecialIllustrate as ProjectSpecialIllustrate, --项目特殊情况说明
+            0 as Cost --成本 						
+            Into #TempTable1 ");
+
+            sql += string.Format(@"From MBBA_t_Cust100005 A --投标项目表
+            Left JOIN --关联销售订单表
+            T_SAL_ORDER B
+            on A.FTender = B.FTENDERNO
+            AND B.FBusinessType != 'RETURNSO'
+            AND B.F_CYG_CheckBalance != 1
+            AND B.FDocumentStatus = 'C' 
+            AND B.FCloseStatus = 'A' 
+            AND B.FCancelStatus = 'A'
+            Left JOIN --销售出库单
+            T_SAL_OUTSTOCK C
+            on A.FTENDER = C.FTENDERNO
+            AND C.FDocumentStatus = 'C'
+            AND C.FCancelStatus = 'A'
+            Left JOIN --应收单 
+            T_AR_RECEIVABLE D
+            on A.FTENDER = D.FTENDERNO
+            AND D.FDocumentStatus = 'C'
+            AND D.FWRITTENOFFSTATUS != 'C' --过滤完全核销单据
+            AND D.FCancelStatus = 'A'
+            Left JOIN --销售合同
+            T_CRM_CONTRACT E
+            on E.F_CYG_BidSerial = A.FTENDER
+            AND E.FDocumentStatus = 'C'
+            AND E.FCloseStatus = 'A'
+            AND E.FCancelStatus = 'A'
+            Where 1=1");
+
+            //过滤条件
+            if (!string.IsNullOrEmpty(fDate)) 
+            {
+                string dateString = fDate.Split('-')[0];
+                sql += string.Format(@" AND A.FYEAR = {0}", dateString);
+            }
+            if (!string.IsNullOrEmpty(fTender)) 
+            {
+                sql += string.Format(@" AND A.FTender = '{0}'", fTender);
+            }
+
+            sql += string.Format(@";");
+
+            sql += string.Format(@"/*dialect*/
+            Select 
+            ROW_NUMBER() OVER (ORDER BY Year) AS FID,
+            ROW_NUMBER() OVER (ORDER BY Year) AS FIDENTITYID,
+            *
+            into {0}
+            From #TempTable1", tableName);
+
+            DBUtils.Execute(this.Context, sql);
+        }
+
+        /// <summary>
+        /// 获取前端组件转换过滤条件
+        /// </summary>
+        /// <param name="filter"></param>
+        /// <returns></returns>
+        public override ReportTitles GetReportTitles(IRptParams filter)
+        {
+            ReportTitles reportTitles = new ReportTitles();
+            DynamicObject customFilter = filter.FilterParameter.CustomFilter;
+
+            if (customFilter != null)
+            {
+                // 截至日期
+                string fDate = customFilter["FDate"]?.ToString();
+                // 标书编号
+                string fTender = customFilter["FTender"]?.ToString();
+
+                //这里是报表页面的标识
+                reportTitles.AddTitle("FTender", fTender == null ? "" : fTender);
+                reportTitles.AddTitle("FDate", fDate == null ? "" : Convert.ToDateTime(fDate).ToString("yyyy-MM-dd"));
+            }
+            return reportTitles;
+        }
+    }
+}
--- a/TenderItem.Induct/TenderProjectReportPlugin2.cs
+++ b/TenderItem.Induct/TenderProjectReportPlugin2.cs
@ -0,0 +1,203 @@
+using Kingdee.BOS.App.Data;
+using Kingdee.BOS.Contracts.Report;
+using Kingdee.BOS.Core.Report;
+using Kingdee.BOS.Orm.Cvp;
+using Kingdee.BOS.Orm.DataEntity;
+using Kingdee.BOS.Util;
+using Kingdee.BOS;
+using System;
+using System.Collections.Generic;
+using System.ComponentModel;
+using System.Data;
+using System.Linq;
+using System.Text;
+using System.Threading.Tasks;
+
+namespace TenderItem.Induct
+{
+    /// <summary>
+    /// 【列表插件】投标项目数据简单报表2
+    /// </summary>
+    [Description("【列表插件】投标项目数据报表2"), HotUpdate]
+    public class TenderProjectReportPlugin2 : SysReportBaseService
+    {
+        /// <summary>
+        /// 初始化 
+        /// </summary>
+        public override void Initialize()
+        {
+            base.Initialize();
+            this.ReportProperty.ReportName = new LocaleValue("投标项目数据报表", base.Context.UserLocale.LCID);
+            this.ReportProperty.IsUIDesignerColumns = false;
+            // 简单账表类型：普通、树形、分页
+            this.ReportProperty.ReportType = ReportType.REPORTTYPE_NORMAL;
+            this.IsCreateTempTableByPlugin = true;
+            // 
+            this.IsCreateTempTableByPlugin = true;
+            // 
+            this.ReportProperty.IsGroupSummary = true;
+            // 
+            this.ReportProperty.SimpleAllCols = false;
+            // 单据主键：两行FID相同，则为同一单的两条分录，单据编号可以不重复显示
+            this.ReportProperty.PrimaryKeyFieldName = "FID";
+            // 
+            this.ReportProperty.IsDefaultOnlyDspSumAndDetailData = true;
+
+            // 设置精度控制
+            var list = new List<DecimalControlField>
+            {
+                new DecimalControlField("FDECIMALS", "OrigInvoiceAmount"),
+                new DecimalControlField("FDECIMALS", "ExchangeRate"),
+                new DecimalControlField("FDECIMALS", "InvoiceAmountTHB"),
+                new DecimalControlField("FDECIMALS", "MonthEndExRate"),
+                new DecimalControlField("FDECIMALS", "RevaluationAountInTHB"),
+                new DecimalControlField("FDECIMALS", "UnrealizedGainLoss"),
+            };
+            this.ReportProperty.DecimalControlFieldList = list;
+        }
+
+        public override ReportHeader GetReportHeaders(IRptParams filter)
+        {
+            base.GetReportHeaders(filter);
+            ReportHeader header = new ReportHeader();
+            if (this.Context.UserLocale.LCID == 2052)
+            {
+                header.AddChild("Year", new LocaleValue("年份"), SqlStorageType.Sqlvarchar);
+                header.AddChild("TenderNumber", new LocaleValue("招标编号"), SqlStorageType.Sqlvarchar);
+                header.AddChild("TenderMain", new LocaleValue("标书主编号"), SqlStorageType.Sqlvarchar);
+                header.AddChild("Tender", new LocaleValue("标书编号"), SqlStorageType.Sqlvarchar);
+                header.AddChild("ProjectName", new LocaleValue("项目名称"), SqlStorageType.Sqlvarchar);
+                header.AddChild("TenderingUnit", new LocaleValue("招标单位"), SqlStorageType.Sqlvarchar);
+                header.AddChild("BidProjectType", new LocaleValue("中标项目分类"), SqlStorageType.Sqlvarchar);
+                header.AddChild("ProvincesHead", new LocaleValue("省区负责人"), SqlStorageType.Sqlvarchar);
+                header.AddChild("Authorizer", new LocaleValue("授权人"), SqlStorageType.Sqlvarchar);
+                header.AddChild("Region", new LocaleValue("大区"), SqlStorageType.Sqlvarchar);
+                header.AddChild("Provinces", new LocaleValue("省区"), SqlStorageType.Sqlvarchar);
+                header.AddChild("BidProductsType", new LocaleValue("中标产品分类"), SqlStorageType.Sqlvarchar);
+                header.AddChild("BidProducts", new LocaleValue("中标产品"), SqlStorageType.Sqlvarchar);
+                header.AddChild("BidPackageNumber", new LocaleValue("中标包号"), SqlStorageType.Sqlvarchar);
+                header.AddChild("WinningBid", new LocaleValue("中标额（万元）"), SqlStorageType.SqlDecimal);
+                header.AddChild("FrameVolume", new LocaleValue("框架标预估体量"), SqlStorageType.SqlDecimal);
+                header.AddChild("WinningBidSubtotal", new LocaleValue("中标额小计"), SqlStorageType.SqlDecimal);
+                header.AddChild("BidsDate", new LocaleValue("开标时间"), SqlStorageType.SqlDatetime);
+                header.AddChild("InstallationIllustrate", new LocaleValue("安装说明"), SqlStorageType.Sqlvarchar);
+                header.AddChild("Remark", new LocaleValue("备注"), SqlStorageType.Sqlvarchar);
+                header.AddChild("ContractOriginalReturns", new LocaleValue("合同原件返回额"), SqlStorageType.SqlDecimal);
+                header.AddChild("AmountOrder", new LocaleValue("下单金额"), SqlStorageType.SqlDecimal);
+                header.AddChild("AmountOriginalOrder", new LocaleValue("下单无原件金额"), SqlStorageType.SqlDecimal);
+                header.AddChild("ContractAmountOrder", new LocaleValue("合同返回未下单金额"), SqlStorageType.SqlDecimal);
+                header.AddChild("BidderNotAgency", new LocaleValue("中标未签约且未下单（万元）"), SqlStorageType.SqlDecimal);
+                header.AddChild("Sales", new LocaleValue("销售额"), SqlStorageType.SqlDecimal);
+                header.AddChild("InvoicedAmount", new LocaleValue("已开票额"), SqlStorageType.SqlDecimal);
+                header.AddChild("UnbilledAmount", new LocaleValue("未开票额"), SqlStorageType.SqlDecimal);
+                header.AddChild("ProjectSpecialIllustrate", new LocaleValue("项目特殊情况说明"), SqlStorageType.Sqlvarchar);
+                header.AddChild("Cost", new LocaleValue("成本"), SqlStorageType.SqlDecimal);
+            }
+            else
+            {
+                header.AddChild("Year", new LocaleValue("Year"), SqlStorageType.Sqlvarchar);
+                header.AddChild("TenderNumber", new LocaleValue("TenderNumber"), SqlStorageType.Sqlvarchar);
+                header.AddChild("TenderMain", new LocaleValue("TenderMain"), SqlStorageType.Sqlvarchar);
+                header.AddChild("Tender", new LocaleValue("Tender"), SqlStorageType.Sqlvarchar);
+                header.AddChild("ProjectName", new LocaleValue("ProjectName"), SqlStorageType.Sqlvarchar);
+                header.AddChild("TenderingUnit", new LocaleValue("TenderingUnit"), SqlStorageType.Sqlvarchar);
+                header.AddChild("BidProjectType", new LocaleValue("BidProjectType"), SqlStorageType.Sqlvarchar);
+                header.AddChild("ProvincesHead", new LocaleValue("ProvincesHead"), SqlStorageType.Sqlvarchar);
+                header.AddChild("Authorizer", new LocaleValue("Authorizer"), SqlStorageType.Sqlvarchar);
+                header.AddChild("Region", new LocaleValue("Region"), SqlStorageType.Sqlvarchar);
+                header.AddChild("Provinces", new LocaleValue("Provinces"), SqlStorageType.Sqlvarchar);
+                header.AddChild("BidProductsType", new LocaleValue("BidProductsType"), SqlStorageType.Sqlvarchar);
+                header.AddChild("BidProducts", new LocaleValue("BidProducts"), SqlStorageType.Sqlvarchar);
+                header.AddChild("BidPackageNumber", new LocaleValue("BidPackageNumber"), SqlStorageType.Sqlvarchar);
+                header.AddChild("WinningBid", new LocaleValue("WinningBid"), SqlStorageType.SqlDecimal);
+                header.AddChild("FrameVolume", new LocaleValue("FrameVolume"), SqlStorageType.SqlDecimal);
+                header.AddChild("WinningBidSubtotal", new LocaleValue("WinningBidSubtotal"), SqlStorageType.SqlDecimal);
+                header.AddChild("BidsDate", new LocaleValue("InstallationIllustrate"), SqlStorageType.SqlDatetime);
+                header.AddChild("InstallationIllustrate", new LocaleValue("InstallationIllustrate"), SqlStorageType.Sqlvarchar);
+                header.AddChild("Remark", new LocaleValue("Remark"), SqlStorageType.Sqlvarchar);
+                header.AddChild("ContractOriginalReturns", new LocaleValue("ContractOriginalReturns"), SqlStorageType.SqlDecimal);
+                header.AddChild("AmountOrder", new LocaleValue("AmountOrder"), SqlStorageType.SqlDecimal);
+                header.AddChild("AmountOriginalOrder", new LocaleValue("AmountOriginalOrder"), SqlStorageType.SqlDecimal);
+                header.AddChild("ContractAmountOrder", new LocaleValue("ContractAmountOrder"), SqlStorageType.SqlDecimal);
+                header.AddChild("BidderNotAgency", new LocaleValue("BidderNotAgency"), SqlStorageType.SqlDecimal);
+                header.AddChild("Sales", new LocaleValue("Sales"), SqlStorageType.SqlDecimal);
+                header.AddChild("InvoicedAmount", new LocaleValue("InvoicedAmount"), SqlStorageType.SqlDecimal);
+                header.AddChild("UnbilledAmount", new LocaleValue("UnbilledAmount"), SqlStorageType.SqlDecimal);
+                header.AddChild("ProjectSpecialIllustrate", new LocaleValue("ProjectSpecialIllustrate"), SqlStorageType.Sqlvarchar);
+                header.AddChild("Cost", new LocaleValue("Cost"), SqlStorageType.SqlDecimal);
+            }
+            foreach (var item in header.GetChilds())
+            {
+                item.Width = 150;
+            }
+            return header;
+        }
+
+        public override void BuilderReportSqlAndTempTable(IRptParams filter, string tableName)
+        {
+            DynamicObject customFilter = filter.FilterParameter.CustomFilter;
+
+            // 年份
+            string fDate = customFilter["FDate"]?.ToString();
+            // 标书编号
+            string fTender = customFilter["FTender"]?.ToString();//FTender
+
+            base.BuilderReportSqlAndTempTable(filter, tableName);
+
+            string sql = string.Format(@"/*dialect*/
+            SELECT 
+            * 
+            INTO #TempTable1
+            FROM 
+            T_DB_TESTVIEW 
+            WHERE 1=1");
+
+            //过滤条件
+            if (!string.IsNullOrEmpty(fDate)) 
+            {
+                string dateString = fDate.Split('-')[0];
+                sql += string.Format(@" AND YEAR = {0}", dateString);
+            }
+            if (!string.IsNullOrEmpty(fTender)) 
+            {
+                sql += string.Format(@" AND Tender = '{0}'", fTender);
+            }
+
+            sql += string.Format(@";");
+
+            sql += string.Format(@"/*dialect*/
+            Select 
+            ROW_NUMBER() OVER (ORDER BY Year) AS FID,
+            ROW_NUMBER() OVER (ORDER BY Year) AS FIDENTITYID,
+            *
+            INTO {0}
+            From #TempTable1", tableName);
+
+            DBUtils.Execute(this.Context, sql);
+        }
+
+        /// <summary>
+        /// 获取前端组件转换过滤条件
+        /// </summary>
+        /// <param name="filter"></param>
+        /// <returns></returns>
+        public override ReportTitles GetReportTitles(IRptParams filter)
+        {
+            ReportTitles reportTitles = new ReportTitles();
+            DynamicObject customFilter = filter.FilterParameter.CustomFilter;
+
+            if (customFilter != null)
+            {
+                // 截至日期
+                string fDate = customFilter["FDate"]?.ToString();
+                // 标书编号
+                string fTender = customFilter["FTender"]?.ToString();
+
+                //这里是报表页面的标识
+                reportTitles.AddTitle("FTender", fTender == null ? "" : fTender);
+                reportTitles.AddTitle("FDate", fDate == null ? "" : Convert.ToDateTime(fDate).ToString("yyyy-MM-dd"));
+            }
+            return reportTitles;
+        }
+    }
+}
--- a/TenderItem.sln
+++ b/TenderItem.sln
@ -0,0 +1,25 @@
+
+Microsoft Visual Studio Solution File, Format Version 12.00
+# Visual Studio Version 17
+VisualStudioVersion = 17.11.35327.3
+MinimumVisualStudioVersion = 10.0.40219.1
+Project("{FAE04EC0-301F-11D3-BF4B-00C04F79EFBC}") = "TenderItem.Induct", "TenderItem.Induct\TenderItem.Induct.csproj", "{B19F9275-CF4F-45AD-A0B1-A138317DDF6B}"
+EndProject
+Global
+	GlobalSection(SolutionConfigurationPlatforms) = preSolution
+		Debug|Any CPU = Debug|Any CPU
+		Release|Any CPU = Release|Any CPU
+	EndGlobalSection
+	GlobalSection(ProjectConfigurationPlatforms) = postSolution
+		{B19F9275-CF4F-45AD-A0B1-A138317DDF6B}.Debug|Any CPU.ActiveCfg = Debug|Any CPU
+		{B19F9275-CF4F-45AD-A0B1-A138317DDF6B}.Debug|Any CPU.Build.0 = Debug|Any CPU
+		{B19F9275-CF4F-45AD-A0B1-A138317DDF6B}.Release|Any CPU.ActiveCfg = Release|Any CPU
+		{B19F9275-CF4F-45AD-A0B1-A138317DDF6B}.Release|Any CPU.Build.0 = Release|Any CPU
+	EndGlobalSection
+	GlobalSection(SolutionProperties) = preSolution
+		HideSolutionNode = FALSE
+	EndGlobalSection
+	GlobalSection(ExtensibilityGlobals) = postSolution
+		SolutionGuid = {62FD1093-89C0-435F-86D4-BD6B63A15E7C}
+	EndGlobalSection
+EndGlobal